Tools for assembling a bicycle

Most good quality bicycles are usually supplied with “Bicycle Owner’s Manual”. If it is not supplied with the bicycle you purchased, you can easily find one if you google “bicycle owner’s manual”.

I googled “bmx bicycle assembly tools .pdf” and found a link to this image of tools:

These are the tools you require:
1. Standard Phillips Head Screwdriver
2. Adjustable Wrench
3. 4,5,6,8mm Allen Wrenches
4. Pedal wrench or 15mm Open End Wrench
5. Standard Slip Joint Pliers
6. Standard Flat Head Screwdriver

This information is extracted from Dynacraft Owner’s Manual. It provides very clear instruction for assembling a 12” to 24” wheelsize BMX which is the standard procedure for assembling most single speed bicycles. Since the manual is for a BMX, it includes information about gyro brake system which you can ignore if your bicycle is not installed with one..

However, if you assembling a bicycle with gear components installed, check out “Dynacraft Owner’s Manual for MTB”. The tools required for assembling it are the same.